Branch:
{{vm.headerLinks.defaultWarehouse.linkText}}Pending Approvals:
{{vm.headerLinks.pendingApproval.linkText.split(" ")[0]}}Open Orders:
{{vm.headerLinks.openOrders.linkText.split(" ")[0]}}Product Lists:
{{vm.headerLinks.productList.linkText.split(" ")[0]}}
Powell Valves GA01FA58GB_2IN Gate Valve, 2 in, Raised Face Flanged, Steel
Forged Steel Gate Valves
480517
MFG #: GA01FA58GB_2IN
533.00000
/ ea
- Actuator Type: Manual
- Additional Information: 7.1 in Dia Handwheel
- Body Material: Forged Carbon Steel, Steel
- Connection Type: Flanged, Raised Face Flanged
- Flow Coefficient (Cv): 120
- Handle Material: Iron/Steel
- Height: 11 in
- Inlet to Outlet Length: 7
- Manufacturer: Powell Valves
- Material Standard: ASTM A105, A182, A193, A194
- Nominal Size: 2, 2 in
- Opening Size: 1.46 in
- Operator Type: Handwheel
- Packing Material: Graphite, Graphite, PTFE
- Pressure Class: 150, Class 150
- Seat Material: Graphite
- Series: GA01 Series
- Softgoods Material: Graphite
- Stem Material: Stainless Steel
- Top to Inlet Center: 11
- Width: 7 in
- Item Name: Gate Valve
- Lead Free: No
- Series/Model: Series GA01
Powell Valves Gate Valve, Series: GA01 Series, 2 in Nominal, Raised Face Flanged Connection, 150 lb Pressure Class, Manual Actuator, 7 in Inlet to Outlet Length, 11 in Top to Inlet Center, Steel Body, Stainless Steel Stem, Graphite Packing, Iron/Steel Handle, Graphite Softgoods, Handwheel Operator, 120 Cv Flow Coefficient (Cv), ASTM A105, A182, A193, A194 Material Standard, Additional Information: 7.1 in Dia Handwheel
- Features
- Wedges are accurately guided thru the entire stroke
- Standard trim is satellite faced seat rings, 13% chrome wedge seat surfaces and 13% chrome stem (API trim 8)
- Seat faces lapped for smooth finish and superior sealing
- Stems are non-rotating with surface finish to maximize packing seal for low fugitive emissions
- Each valve is shell, seat and backseat pressure tested per industry standard API 598
- Gland is two-piece gland/gland flange design for optimal alignment and uniform packing compression
- End flanges have the following raised faces per ASME B16.5
- STANDARD_APPROVALS: API 598/602|ASME B16.11/B16.34/B16.5