Spirax Sarco 69843 Brass Air Eliminator, 3/4 in x 3/8 in, 150 psig, Domestic

Air Vents
121857 MFG #: 69843
Requires Quote

Spirax Sarco 69843 Brass Air Eliminator, 3/4 in x 3/8 in, 150 psig, Domestic
  • Height: 5.1 in
  • Inlet Size: 3/4 in
  • Item Name: Air Eliminator
  • Manufacturer: Spirax Sarco
  • Material: Brass
  • Maximum Pressure: 150 psig
  • Outlet Size: 3/8 in
  • Series/Model: Model 13WS
  • Temperature Rating: 338 deg F
  • Width: 4.4 in

13WS and 13WHS air eliminators improve the circulation of pressurized liquids by eliminating air and other non-condensable gases which may collect at high points in the system. The EPDM valve head ensures tight shut off.

QTY
Add to Wishlist
  • Features
  • An air vent is required at all high points of a liquid system, on terminal equipment and wherever air can collect
  • The air vent must be installed vertically above the pipe or equipment with the inlet at the bottom
  • The inlet piping should be the same size as the body piping connection, and a full port isolating valve should be installed to permit servicing
  • Discharge must be piped to drain or other safe place to prevent damage if the air vent should malfunction
  • Applications: For used on cold water lines, suction lines to pumps, mixing tanks, condensate return lines, cooling water lines on air compressors, and water storage tanks